StrongHold: Routing and securing cables and wires throughout the enterprise.

Routing cable and wiring from Point A to Point B in an industrial application requires a variety of clips and clamps, hangers and hooks, to ensure that wires stay where they should and perform as expected. Panduit's StrongHold Supports and Fasteners install quickly and securely, and provide reliable, durable performance in any environment.

A variety of mounting options allow installation on a variety of structural supports, including beams, conduit, dry wall, stud walls and more. And, secure, rigid installation means electrical boxes, communication cabling, and fixtures stay put, regardless of vibrations and wear and tear.

Contact your local distributor today to see how StrongHold can help you route and secure your next installation.

Stronghold
  • The Beam Clamp (PBC) screws on to beams to allow for general mounting of electrical boxes or other assemblies to beams up to ½" thick. For more beam and purlin mounting options, see the Beam/Purlin section of the StrongHold Catalog.
  • Screw-On Beam Clamp Assemblies with Conduit Clamps (PBC200CD2B) allow easy attachment of conduit to beams up to ½" thick. For more beam and purlin mounting options, see the Beam/Purlin section of the StrongHold Catalog.
  • Metal Stud Grommets (MSGV-1.3-C) route conduit through pre-punched holes in metal studs. Anti-vibration tabs prevent the conduit from vibrating in the wall cavity. For more options to route conduit through stud walls, see the Stud Wall section of the StrongHold Catalog.
  • Hook and Loop cable ties (HLSP1.5S-X12) are used to bundle high-performance communication cable, and are rated for use in plenum applications. For more options on routing and bundling communication or low-voltage cabling, see the Communication/Low Voltage section of the StrongHold Catalog.
  • Bridle Rings (BR-2.0-1/4-20) are available in a variety of mounting options to route low-voltage cabling. For more options on routing communication or low-voltage cabling, see the Communication/Low Voltage section of the StrongHold Catalog.
  • Metal Stud Grommets (MSG-1.3-C) route cable and conduit through pre-punched holes in metal studs. For more options to route cable and conduit through stud walls, see the Stud Wall section of the StrongHold Catalog.
  • The J-PRO Cable Support System (JP2SBC50RB-L20) incorporates bend radius control and is used to route high-performance communication cabling throughout the building infrastructure. For more options on routing communication or low-voltage cabling, see the Communication/Low Voltage section of the StrongHold Catalog.
  • Independent Drop Wire clips (PEC311) satisfy National Electrical Code requirements and prevent sway of a dedicated drop wire that is often used to support J-hooks. For more options on accessories used above the suspended ceiling, see the Acoustical section of the StrongHold Catalog.
  • Conduit Clips (PK12) support conduit from a drop wire, rod, or flange. For more options to route cable and conduit, see the Cable/Conduit section of the StrongHold Catalog.
  • The Snap-Close Conduit Clamp with Beam Clamp (P812M24) installs quickly and easily with a hammer to suspend conduit from the beam. For more options to route cable and conduit, see the Cable/Conduit section of the StrongHold Catalog.
  • The Hammer-On Beam Clamps with Rod Hanger (P4TI24) allow threaded rods to be suspended from beams. For more beam and purlin mounting options, see the Beam/Purlin section of the StrongHold Catalog. For additional hangers and hanging systems, see the Hangers/Hanging Systems section of the StrongHold Catalog.
  • The Hammer-On Beam Clamp with Attachment Tab (P4H24) hammers onto a beam to provide an attachment point for wire, S-hooks, or chain assemblies. For more beam and purlin mounting options, see the Beam/Purlin section of the StrongHold Catalog.
  • The Conduit-to-Conduit Trapeze Assemblies with Snap-Close Clips (P16812M) quickly secure one conduit run to another. For more options to route cable and conduit, see the Cable/Conduit section of the StrongHold Catalog.
  • One-Piece Strut Clamps (PSCH12B) secure conduit to standard 1-5/8" strut. For more options to route cable and conduit, see the Cable/Conduit section of the StrongHold Catalog.
  • T-Bar Clip Mount Assemblies (P12PATS) will support conduit above the acoustical T-bar. Used in conjunction with standard T-bar clips (PATA4I) mounted to the electrical box, the installer can eliminate the need for offset bending conduit. For more options on accessories used above the suspended ceiling, see the Acoustical section of the StrongHold Catalog.
  • The Cable Manager (CSM-1.25-C) installs in pre-punched holes in the metal studs to protect the cable within the building structure. For more options to route cable through stud walls, see the Stud Wall section of the StrongHold Catalog.
  • Low-Voltage Mounting Brackets (LV-W-1G) are available for single or double gang applications to mount a low-voltage box in retrofit installations where the stud wall is not accessible. For more options on low-voltage mounting brackets, see the Dry Wall section of the StrongHold Catalog.
  • Low-Voltage Mounting Brackets (LV-S-1G) are available for single or double gang applications to mount a low-voltage box in new installations where the stud wall is accessible. For more options on low-voltage mounting brackets, see the Dry Wall section of the StrongHold Catalog.
  • Screw-On Conduit Supports (PCS812D) accommodate EMT and MC/AC cables and works, in compliance with the National Electrical Code to support cable and conduit close to the electrical box. For more options to mount conduit to stud walls, see the Stud Wall section of the StrongHold Catalog.
  • Hammer-On Conduit to Metal Stud Brackets (P812MF) are designed to quickly install runs of conduit to metal studs. For more options to mount conduit to stud walls, see the Stud Wall section of the StrongHold Catalog.
  • Rigid Box Mounting Brackets (PRBS16) can secure up to three electrical boxes in stud walls. For more options to mount electrical boxes to stud walls, see the Stud Wall section of the StrongHold Catalog.
  • Electrical Box Mounting Support Brackets (PH23) are used to attach electrical outlet boxes to stud walls. For more options to mount electrical boxes to stud walls, see the Stud Wall section of the StrongHold Catalog.